CERVINIS 'GT500 Style' Hood (Unpainted) for Mustang 2018-21 | #1245
Advice to customers.
We're currently averaging 6-8 week order lead time from Cervinis on items listed above as 'available for pre-order'. Upon placing your order we'll confirm availability directly with Cervinis (USA) and aim to bring the item over on a future shipment, you'll then be notified by email in 3-5 working days of the expected arrival date.
Nemesis UK usually hold stock of most Cervinis upgrades for 2015-17 and 2018+ Mustangs and items may be available sooner, if due to be delivered on a forthcoming shipment.
We welcome customers to get in touch with us prior to placing an order to get an idea on the current estimated lead time for any part.
Other factors concerning ordering and delivery are covered here.
Nemesis UK make every effort to deliver goods within the estimated timescales, however delays are occasionally inevitable due to unforeseen factors. Nemesis UK shall be under no liability for any delay or failure to deliver the products within estimated timescales or for any shortfalls with the carrier service used.
Nemesis UK cannot guarantee delivery until the part has been accepted into our UK distribution centre and checked. We therefore advise that you do NOT book fitting to your vehicle for any parts until the goods have arrived with yourself.
Please note that if a signed for delivery service has been used, you should only accept the goods from the courier if the packaging appears in a suitably good condition. If you believe the parcel to have been damaged in transit, do not sign for the goods and please contact us immediately.
GT500 Style Hood (Unpainted)
for Ford Mustang 2.3L Ecoboost / 5.0L GT 2018-21
Manufactured by Cervinis | Part #1245
Inspired by the 2020 GT500, Cervini's GT500 Style Heat Extractor Hood is an easy add-on to your build.
Fully functional heat extraction is now available for your 2018-21 Mustang!
- Easily replaces the factory hood using simple hand tools.
- No cutting, drilling, shaving, trimming.
- Attaches to the factory hinges and latch with NO need for hood pins.
- Exclusive channel on the underside of the hood that conceals the washer nozzle hoses.
The louvre is fully functional and will expel horse power-robbing heat. The hood features a removable water drainage tray that channels water forward, allowing it to drain without interfering with your engine’s moving parts. With the added clearance this hood offers, you will be able to run most power adder setups with no rubbing, or clearance issues. This hood is designed to work around the Cobra Jet, Boss 302 and other superchargers that require ample hood clearance.
Cervini’s GT500 style heat extractor hood is at home on the street, strip, or road track! Functional design with assertive styling… what else could you ask for?
- Ford Mustang 2.3L Ecoboost 2018, 2019, 2020, 2021
- Ford Mustang 5.0L GT 2018, 2019, 2020, 2021
- All models except GT350.